• 人生奋斗为了幸福,幸福了更要奋斗,应该是公平本姓 ! 2019-02-21
  • 紫光阁中共中央国家机关工作委员会 2019-02-15
  • 这些藏在主城中的小众公园 景美还免费 2019-02-15
  • 为助推西藏长足发展和长治久安作出新贡献 2019-02-11
  • 女性之声——全国妇联 2019-02-11
  • 中国人民大学校长刘伟:文化自信的根基是教育自信 2019-02-09
  • 习近平为传统文化“代言” 2019-02-06
  • 岳麓书院院长肖永明:“文化之道”在当代贯穿始终 2019-02-06
  • 段家寨岔上村党支部主题党日助脱贫 2019-02-06
  • 重庆市南岸区:探索建立“微益坊” 2019-02-06
  • 重庆市工商行政管理局公众信息网 2019-02-02
  • 端午假期结束 中国接待国内游客8910万人次 2019-01-27
  • 陕西那些事儿——西部网 2019-01-27
  • 第三届“五个一百”网络正能量评选活动 2019-01-16
  • 西藏拉萨两年4.38万人脱贫 2019-01-16
  • 四川金7乐软件下载: Paint Knowledge油漆知识

    新闻中心油漆知识
    See More.. 查阅更多

    ISO涂装标准(ISO painting standards)

    文章来源:梦能科技   浏览次数:2799

    一、ISO涂装标准介绍

    ISO涂装标准(ISO painting standards):国际标准是指国际标准化组织(ISO)、国际电工委员会(IEC)和国际电信联盟(ITU)制定的标准,以及国际标准化组织确认并公布的其他国际组织制定的标准。国际标准在世界范围内统一使用。
    ISO 12944 是在一般环境条件下钢结构涂层防腐较全面的标准,是国际标准化组织为从事防腐蚀工作的业主、设计人员、咨询顾问、涂装承包商、涂料生产和施工企业等汇编的标准。目前国内钢结构防腐涂层体系设计普遍采用ISO12944作为指导性标准,普遍参考的内容是腐蚀环境分级和涂层厚度设计部分。本文对ISO12944涵盖的8部分内容,进行了简要介绍,以便对这个标准有一个全面的认识,对我国钢结构防腐涂层技术有所益处。
    ISO 8501 由以下部分组成,总标题、涂料和相关产品使用前 钢衬底的制备——表面清洁度的目测评估: 部分1:未涂装钢材与全面去除已有涂装钢材的锈蚀等级。部分2:部分去除已有涂装的已涂装钢材的预处理等级。部分3:带有表面缺陷的焊缝、边角、等区块的预处理等级。部分4:关于高压喷水除锈的初始表面情况、预处理等级和除 锈等级,涂装油漆和相关产品前的钢材的预处理/表面清洁度的目测评价。

    二、ISO涂装标准主要内容

    编号 中文名称 英文名称
    IEC/PAS 62182 Edition 1.0-2000 可靠度检验之前的不密闭的表面安装器件的预处理 Preconditioning of nonhermetic surface mount devices prior to reliability testing
    ISO 11124-1-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第1部分:一般介绍及分类 Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 1: general introduction and classification
    ISO 11124-2-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第2部分:冷硬铸铁丸 Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 2: chilled-iron grit
    ISO 11124-3-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第3部分:高碳铸钢丸和砂 Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 3: high-carbon cast-steel shot and grit
    ISO 11124-4-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第4部分:低碳铸钢丸 Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 4: low-carbon cast-steel shot
    ISO 11125-1-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第1部分:抽样 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 1: sampling
    ISO 11125-2-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 2: determination of particle size distribution
    ISO 11125-3-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第3部分:硬度测定 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 3: determination of hardness
    ISO 11125-4-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第4部分:表观密度测定 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 4: determination of apparent density
    ISO 11125-5-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒的百分比和微结构的测定 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 5: determination of percentage defective particles and of microstructure
    ISO 11125-6-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质测定 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 6: determination of foreign matter
    ISO 11125-7-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第7部分:含水量测定 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 7: determination of moisture
    ISO 11126-1 Technical Corrigendum 1-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第1部分:总体介绍和分类 技术勘误1 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification; Technical Corrigendum 1
    ISO 11126-1 Technical Corrigendum 2-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第1部分:总体介绍和分类 技术勘误2 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification; Technical Corrigendum 2
    ISO 11126-1-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第1部分:总体介绍和分类 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 1: general introduction and classification
    ISO 11126-10-2000 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第10部分:铁铅石榴石 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garne
    ISO 11126-3-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第3部分:铜精炼渣 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 3: copper refinery slag
    ISO 11126-4-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第4部分:煤炉渣 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 4: coal furnace slag
    ISO 11126-5-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第5部分:镍精炼渣 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 5: nickel refinery slag
    ISO 11126-6-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第6部分:炼铁炉渣 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 6: iron furnace slag
    ISO 11126-7 Technical Corrigendum 1-1999 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第7部分:熔融氧化铝 技术勘误1 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide; Technical Corrigendum 1
    ISO 11126-7-1995 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第7部分:熔融氧化铝 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide
    ISO 11126-8-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第8部分:橄榄石砂 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 8: olivine sand
    ISO 11126-9-1999 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第9部分:十字石 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite
    ISO 11127-1-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第1部分:抽样 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 1: sampling
    ISO 11127-2-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第2部分:颗粒尺寸分布的测定 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 2: determination of particle size distribution
    ISO 11127-3-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第3部分:表观密度测定 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 3: determination of apparent density
    ISO 11127-4-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第4部分:通过玻璃载片试验评定硬度 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 4: assessment of hardness by a glass slide test
    ISO 11127-5-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第5部分:含水量测定 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 5: determination of moisture
    ISO 11127-6-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第6部分:通过测量电导率测定水溶性杂质 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 6: determination of water-soluble contaminants by conductivity measurement
    ISO 11127-7-1993 涂装油漆和有关产品前钢材预处理 非金属喷沙清理磨料的试验方法 第7部分:水溶性氯化物的测定 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 7: determination of water-soluble chlorides
    ISO 11218-1993 航空航天 液压油液清洁度分级 Aerospace; cleanliness classification for hydraulic fluids
    ISO 11464-2006 土壤质量.物理化学分析用样品的预处理 Soil quality - Pretreatment of samples for physico-chemical analysis
    ISO 11998-2006 色漆和清漆.测定涂层的耐湿性和清洁度 Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings
    ISO 12345-2002 柴油发动机.燃料喷射设备的清洁度评定 Diesel engines - Cleanliness assessment of fuel injection equipment
    ISO 14507-2003 土质.测定有机污物用试样的预处理 Soil quality - Pretreatment of samples for determination of organic contaminants
    ISO 14952-1-2003 航天系统.流体系统的表面清洁度.第1部分:词汇 Space systems - Surface cleanliness of fluid systems - Part 1: Vocabulary
    ISO 14952-2-2003 航天系统.流体系统的表面清洁度.第2部分:清洁度等级 Space systems - Surface cleanliness of fluid systems - Part 2: Cleanliness levels
    ISO 14952-3-2003 航天系统.流体系统的表面清洁度.第3部分:非挥发性残余物和粒子浓度的测定用分析方法 Space systems - Surface cleanliness of fluid systems - Part 3: Analytical procedures for the determination of nonvolatile residues and particulate contamination
    ISO 14952-4-2003 航天系统.流体系统的表面清洁度.第4部分:初步清洁过程 Space systems - Surface cleanliness of fluid systems - Part 4: Rough-cleaning processes
    ISO 14952-5-2003 航天系统.流体系统的表面清洁度.第5部分:干燥过程 Space systems - Surface cleanliness of fluid systems - Part 5: Drying processes
    ISO 14952-6-2003 航天系统.流体系统的表面清洁度.第6部分:精细清洁过程 Space systems - Surface cleanliness of fluid systems - Part 6: Precision-cleaning processes
    ISO 15388-2004 空间系统.污染和清洁度控制 Space systems - Contamination and cleanliness control
    ISO 16720-2005 土质.连续分析用试样的冻干法预处理 Soil quality - Pretreatment of samples by freeze-drying for subsequent analysis
    ISO 18413-2002 液压传动.部件和元件的清洁度.与污物收集、分析和数据报告相关的检验文件和原则 Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection, analysis and data reporting
    ISO 6761-1981 钢管 焊接用管端和配件的预处理 Steel tubes; Preparation of ends of tubes and fittings for welding
    ISO 8501-1 Supplement-1994 涂料和有关产品使用前钢衬底的制备.表面清洁度的视觉评价.第1部分的补充信息:用不同磨料喷砂处理时钢表面变 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Informative supplement to Part 1: Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives
    ISO 8501-1-1988 涂料和有关产品使用前钢衬底的制备.表面清洁度的视觉评价.第1部分:未涂覆钢衬底和已有覆层全部除去后钢衬底 Preparation of steel substrates before application of paints and related products; visual assessment of surface cleanliness; part 1: rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
    ISO 8501-2-1994 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第2部分:局部去除原有涂层后钢材的除锈等级 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
    ISO 8501-3-2006 涂装油漆和有关产品前钢材的预处理.表面清洁度的目视评定.第3部分:焊接、切边及其它表面缺陷区域的处理等级 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections
    ISO 8502-11-2006 涂装油漆和有关产品前钢材预处理.表面清洁度的评定试验.第11部分:水溶性硫酸盐浊度测定的现场方法 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate
    ISO 8502-12-2003 使用涂料和相关产品之前钢基质的制备.表面清洁度评定试验.第12部分:滴定测定水溶铁离子的现场试验方法 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrrous ions
    ISO 8502-2-2005 涂覆油漆和相关产品前钢材衬底的预处理.表面清洁度的评定试验.第2部分:洁净表面氯化物的测定 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces
    ISO 8502-3-1992 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第3部分:油漆前预处理后的钢材表面上的灰尘评定(压 Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 3: assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
    ISO 8502-4-1993 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第4部分:油覆前凝露可能性的评定导则 Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 4: Guidance on the estimation of the probability of condensation prior to paint application
    ISO 8502-5-1998 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第5部分:涂装前钢材表面上氯化物测定(离子探测管法) Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)
    ISO 8502-6-2006 油漆和相关产品用前钢材的预处理.表面清洁度的评定试验.第6部分:提取分析用可溶性杂质.Bresle法 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method
    ISO 8502-8-2001 涂装油漆和有关产品前钢材的预处理 表面清洁度评定试验 第8部分:现场水分折射测定方法 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the refractometric determination of moisture
    ISO 8502-9-1998 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第9部分:水溶性盐的现场电导测定法 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts
    ISO 8503-1-1988 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第1部分:磨料喷射清理表面粗糙度的ISO评定 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 1: specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
    ISO 8503-2-1988 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第2部分:磨料喷射清理表面的粗糙度定级方法 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 2: method for the grading of surface profile of abrasive blast-cleaned steel; comparator procedure
    ISO 8503-3-1988 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第3部分:ISO表面轮廓比较仪的校准方法和表 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 3: method for the calibration of ISO surface profile comparators and for the determination of surface profile; focusing microscope procedure
    ISO 8503-4-1988 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第4部分:ISO表面轮廓比较仪的校准方法和表 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 4: method for the calibration of ISO surface profile comparators and for the determination of surface profile; stylus instrument procedure
    ISO 8503-5-2003 涂装油漆和有关产品前钢材预处理.喷射清理钢材的表面粗糙度特性.第5部分:表面轮廓测定的复制带法 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile
    ISO 8504-1-2000 涂装油漆和有关产品前钢材预处理 表面预处理方法 第1部分:总则 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles
    ISO 8504-2-2000 涂装油漆和有关产品前钢材预处理.表面预处理方法.第2部分:磨料喷射清理 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning
    ISO 8504-3-1993 涂装油漆和有关产品前钢材预处理 表面预处理方法 第3部分:手工和动力工具清洗 Preparation of steel substrates before application of paints and related products; surface preparation methods; part 3: hand- and power-tool cleaning
    ISO 9587-1999 金属和其他无机覆盖层 钢铁为减少氢脆危险的预处理 Metallic and other inorganic coatings - Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
    ISO/TR 10949-2002 液压传动.元件清洁度.从生产到安装的过程中元件清洁度的取得和控制指南 Hydraulic fluid power - Component cleanliness - Guidelines for achieving and controlling cleanliness of components from manufacture to installation
    ISO/TR 15235-2001 涂装油漆和有关产品前钢材的预处理 收集的有关溶水盐污染水平的影响的信息 Preparation of steel substrates before application of paints and related products - Collected information on the effect of levels of water-soluble salt contamination
    ISO/TS 16431-2002 液压传动.配件系统.清洁度的鉴定 Hydraulic fluid power - Assembled systems - Verification of cleanliness

    分享到:

  • 人生奋斗为了幸福,幸福了更要奋斗,应该是公平本姓 ! 2019-02-21
  • 紫光阁中共中央国家机关工作委员会 2019-02-15
  • 这些藏在主城中的小众公园 景美还免费 2019-02-15
  • 为助推西藏长足发展和长治久安作出新贡献 2019-02-11
  • 女性之声——全国妇联 2019-02-11
  • 中国人民大学校长刘伟:文化自信的根基是教育自信 2019-02-09
  • 习近平为传统文化“代言” 2019-02-06
  • 岳麓书院院长肖永明:“文化之道”在当代贯穿始终 2019-02-06
  • 段家寨岔上村党支部主题党日助脱贫 2019-02-06
  • 重庆市南岸区:探索建立“微益坊” 2019-02-06
  • 重庆市工商行政管理局公众信息网 2019-02-02
  • 端午假期结束 中国接待国内游客8910万人次 2019-01-27
  • 陕西那些事儿——西部网 2019-01-27
  • 第三届“五个一百”网络正能量评选活动 2019-01-16
  • 西藏拉萨两年4.38万人脱贫 2019-01-16