• 人生奋斗为了幸福,幸福了更要奋斗,应该是公平本姓 ! 2019-02-21
  • 紫光阁中共中央国家机关工作委员会 2019-02-15
  • 这些藏在主城中的小众公园 景美还免费 2019-02-15
  • 为助推西藏长足发展和长治久安作出新贡献 2019-02-11
  • 女性之声——全国妇联 2019-02-11
  • 中国人民大学校长刘伟:文化自信的根基是教育自信 2019-02-09
  • 习近平为传统文化“代言” 2019-02-06
  • 岳麓书院院长肖永明:“文化之道”在当代贯穿始终 2019-02-06
  • 段家寨岔上村党支部主题党日助脱贫 2019-02-06
  • 重庆市南岸区:探索建立“微益坊” 2019-02-06
  • 重庆市工商行政管理局公众信息网 2019-02-02
  • 端午假期结束 中国接待国内游客8910万人次 2019-01-27
  • 陕西那些事儿——西部网 2019-01-27
  • 第三届“五个一百”网络正能量评选活动 2019-01-16
  • 西藏拉萨两年4.38万人脱贫 2019-01-16
  • 四川金7乐app下载: Paint Knowledge油漆知识

    新闻中心油漆知识
    See More.. 查阅更多

    欧洲涂装标准(EN painting standards)

    文章来源:梦能科技   浏览次数:2799

    一、EN欧洲涂装标准简介

    CENELEC和CEN以及它们的联合机构CEN/ CENELEC是欧洲最主要的标准制定机构。 CENELEC位于比利时的布鲁塞尔,由两个早期的机构合并而成。它的宗旨是协调欧洲有关国家的标准机构所颁布的电工标准和消除贸易上的技术障碍。CENELEC的成员是欧洲共同体12个成员国和欧洲自由贸易区(EFTA)7个成员国的国家委员会。除冰岛和卢森堡外,其余17国均为国际电工委员会(IEC)的成员国。
    CEN于1961年成立于法国巴黎。1971年起CEN迁至布鲁塞尔,后来与CENELEC一起办公。在业务范围上,CENELEC主管电工技术的全部领域,而CEN则管理其它领域。其成员国与CENELEC的相同。除卢森堡外,其它18国均为国际标准化组织(ISO)的成员国。

    二、欧洲涂装标准主要内容

    编号 中文名称 英文名称
    EN 12255-3-2000+AC-2000 废水处理厂 第3部分:预处理 Wastewater treatment plants - Part 3: Preliminary treatment
    EN 12300-1998 低温容器 低温设备的清洁度 Cryogenic vessels - Cleanliness for cryogenic service
    EN 13507-2001 热喷镀 热喷镀金属部件和元件的表面预处理 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
    EN 2591-604-2001 航空航天系列 光电连接元件 试验方法 第604部分:光学元件 光学表面的清洁度 Aerospace series - Elements of electrical and optical connection; Test methods - Part 604: Optical elements; Cleaning capability of optical face
    EN 50176-1996 易燃液体喷涂材料用自动静电喷涂装置 Automatic electrostatic spraying installations for flammable liquid spraying material
    EN 50177-1996 易燃喷涂粉末用自动静电喷涂装置 Automatic electrostatic spraying installations for flammable coating powder
    EN 60811-4-2-1999 电缆绝缘和护套材料 通用试验方法 第4部分:聚乙烯和聚丙烯化合物专用方法 第2节:预处理后抗拉强度和断 Insulating and sheathing materials of electric and optical fibre cables - Common test methods - Part 4: Methods specific to polyethylene and polypropylene compounds - Section 2: Tensile strength and elongation at break after pre-conditioning-Wrapping text often thermal ageing in air-Measurement of mass increase-Long-term stablity text-Text method for Copper-cotalyed oxidation
    EN ISO 11124-1-1997 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第1部分:一般介绍及分类 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11124-1:1993)
    EN ISO 11124-2-1997 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第2部分:冷硬铸铁丸 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:1993)
    EN ISO 11124-4-1997 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第4部分:低碳铸钢丸 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:1993)
    EN ISO 11125-5-1997 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第5部分:缺陷颗粒的百分比和微结构的测定 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:1993)
    EN ISO 11126-1-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第1部分:总体介绍和分类(包括技术勘误1 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11126-1:1993, including Technical Corrigenda 1:1997 and 2:
    EN ISO 11126-6-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第6部分:炼铁炉渣 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag (ISO 11126-6:1993)
    EN ISO 11126-8-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第8部分:橄榄石砂 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993)
    EN ISO 11127-1-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第1部分:抽样 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:1993)
    EN ISO 11127-2-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第2部分:颗粒尺寸分布的测定 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:1993)
    EN ISO 11127-3-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第3部分:表观密度测定 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:1993)
    EN ISO 11127-4-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第4部分:通过玻璃载片试验评定硬度 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:1993)
    EN ISO 11127-5-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第5部分:含水量测定 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:1993)
    EN ISO 11127-6-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第6部分:通过测量电导率测定水溶性杂质 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:1993)
    EN ISO 11127-7-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第7部分:水溶性氯化物的测定 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water soluble chlorides (ISO 11127-7:1993)
    EN ISO 8501-1 Supplement-2001 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第1部分的补充信息:用不同磨料喷砂处理时钢表面 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Informative supplement to Part 1: Representative photographic examples of the change of appearance imparted to steel when blast
    EN ISO 8501-1-2001 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第1部分:未涂装的钢材和全面清除原有涂层后钢材 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previo
    EN ISO 8501-2-2001 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第2部分:局部清除原有涂层后钢材的锈蚀等级 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings (ISO 8501-2:1994)
    EN ISO 8502-2-1999 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第2部分:清理过的表面上的氯化物的实验室测定 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:1992)
    EN ISO 8502-3-1999 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第3部分:油漆前预处理后的钢材表面上的灰尘评定 Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:1992)
    EN ISO 8502-4-1999 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第4部分:油覆前凝露可能性的评定导则 Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:1993)
    EN ISO 8502-6-1999 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第6部分:分析用可溶性杂质的提取 Bresle法 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method (ISO 8502-6:1995)
    EN ISO 8502-9-2000 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第9部分:水溶性盐的现场电导测定法 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998)
    EN ISO 8503-1-1995 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第1部分:磨料喷射清理表面粗糙度的ISO评 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abr
    EN ISO 8503-2-1995 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第2部分:磨料喷射清理表面粗糙度的定级 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proce
    EN ISO 8503-3-1995 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第3部分:ISO表面轮廓比较仪的校准方法和 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of s
    EN ISO 8503-4-1995 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第4部分:ISO表面轮廓比较仪的校准方法和 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of s
    EN ISO 8504-1-2001 涂装油漆和有关产品前钢材预处理 表面预处理方法 第1部分:总则  Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000)
    EN ISO 8504-2-2001 涂装油漆和有关产品前钢材预处理 表面预处理方法 第2部分:磨料喷射清理 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000)
    EN ISO 8504-3-2001 涂装油漆和有关产品前钢材预处理 表面预处理方法 第3部分:手工和动力工具清洗 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:1993)
    ENV ISO 8502-1-1999 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第1部分:可溶性铁锈现场试验 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 1: Field test for soluble iron corrosion products (ISO/TR 8502-1:1991)
    prEN 12921-1-1997 使用液体或蒸气的对工业品进行表面清洁和预处理的机器 第1部分:通用安全要求 Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 1: Common safety requirements
    prEN 12921-2-1997 使用液体或蒸气的对工业品进行表面清洁和预处理的机器 第2部分: 使用水基清洗液的机器安全性 Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids
    prEN 12921-3-1997 使用液体或蒸气的对工业品进行表面清洁和预处理的机器 第3部分使用液体或蒸气的对工业品进行表面清洁和预 Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids
    prEN 12921-4-1997 使用液体或蒸气的对工业品进行表面清洁和预处理的机器 第4部分:使用卤化溶剂的机器安全性 Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 4: Safety of machines using halogenated solvents

    分享到:

  • 人生奋斗为了幸福,幸福了更要奋斗,应该是公平本姓 ! 2019-02-21
  • 紫光阁中共中央国家机关工作委员会 2019-02-15
  • 这些藏在主城中的小众公园 景美还免费 2019-02-15
  • 为助推西藏长足发展和长治久安作出新贡献 2019-02-11
  • 女性之声——全国妇联 2019-02-11
  • 中国人民大学校长刘伟:文化自信的根基是教育自信 2019-02-09
  • 习近平为传统文化“代言” 2019-02-06
  • 岳麓书院院长肖永明:“文化之道”在当代贯穿始终 2019-02-06
  • 段家寨岔上村党支部主题党日助脱贫 2019-02-06
  • 重庆市南岸区:探索建立“微益坊” 2019-02-06
  • 重庆市工商行政管理局公众信息网 2019-02-02
  • 端午假期结束 中国接待国内游客8910万人次 2019-01-27
  • 陕西那些事儿——西部网 2019-01-27
  • 第三届“五个一百”网络正能量评选活动 2019-01-16
  • 西藏拉萨两年4.38万人脱贫 2019-01-16